MONTAGE KIT SUPER STRONG 125GR BISON
- Strong initial grab
- For indoor and outdoor use
- It fills in gaps
- Suitable for materials under pressure
- Bonds two porous surfaces together
- Permanently elastic
- General purpose
- Suitable for uneven surfaces
- It is fixed in a short time
- Waterproof
- Resistant to temperatures
Suitable for all kinds of (building) materials such as: wood, stone, ceramics, cement, metal and other synthetic materials, on almost all stone, cement, wood, metal, synthetic materials, plasterboards, etc. substrates. Suitable for bonding two non-porous surfaces and fixing materials under pressure. Very suitable for installing timber frame, boards, doors, battens (wood / plastic), cladding, window sills, ceramic tiles, construction boards, plasterboard, wood strips, wall cladding sheets, panels, insulation, soft and hard boards, panels, window sills , signs, house numbers, hanging hooks, conduits, sockets and electrical boxes.
Not suitable for
Not suitable for PE, PP, PTFE, cement, polystyrene foam, mirrors, natural stone and in permanently wet areas. When gluing plastics, do an adhesion test first. Bonding to plastics can vary depending on the type of synthetic and the quality of the plastic.
Working conditions
Apply only at temperatures between +5°C and +40°C.
Cover
Wall covering sheets and panels: about 5-8 m² / kg depending on the weight of the material. Boards and timber frame: glued surface approx. 4-6 m² / kg.
Instructions for use
Depending on the weight of the material, spread the glue evenly in vertical strips or dots between 20 and 40 cm. Always apply the adhesive in corners and along edges. Assemble the materials with a pushing motion and press or tap firmly together. Correction is still possible. With heavy materials, materials under pressure or two non-porous materials, apply the power bonding method. Place the material, press and relax immediately. Allow to dry for 5 minutes, assemble in the same place and press firmly or use a hammer. Customization is no longer possible. For heavy materials, connectors or supports may be required.
Stains / residues
Use turpentine to clean tools and remove fresh glue residue. Dried adhesive residues can only be removed by mechanical means.
Storage conditions
Close the container tightly and store in a dry, cool place where there is no chance of ice forming.
Additional information
Weight | 0.140 kg |
---|