BISON SUPER GLUE ALL PLASTIC 3ML+2G BL. TW6

Working conditions: Do not use at temperatures below +10°C. The adhesive responds optimally to an air humidity level of 50%-70%.

Surface Requirements: The materials to be glued must be clean, dry, free of dust and grease and fit properly

Preliminary surface treatment:Any dust, oils, grease, wax or release agents should be thoroughly removed from the surfaces to be bonded. The best way to achieve this is to scrub the parts a few times with suitable solvents such as acetone (if this is suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by sanding or brushing.

Instructions for use: 1. Apply the activator (No. 1) to both sides of the surfaces to be bonded. Allow to dry for 60 seconds. Close the activator immediately after use. 2. To open the glue (No. 2), turn the entire cap clockwise firmly onto the tube. Unscrew the top cap to reveal the application nozzle. Apply a thin layer of glue to one side. Immediately press the parts together. After use: Clean the nozzle with a dry cloth and replace the cap.

Advice: When bonding in a low humidity environment, the curing time can be reduced by briefly exhaling one of the parts to be bonded. The best bonding results are achieved at room temperature.

Attention points: Contains cyanoacrylate compound. Bonds skin and lids in seconds. If the product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of skin contact, the adhesive can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause irritation of the respiratory system. Avoid breathing vapors. Keep away from children

Stains / residues: Immediately wipe off excess glue with a dry cloth. After curing, the adhesive residue is very difficult to remove. Acetone will dissolve the glue, but very slowly (check suitability).

Storage conditions: Store in a dry, cool, frost-free place. Storage below +5 °C (refrigerated) ensures maximum shelf life.