FAST FIX LIQUID POWER 10 G BL BISON

Fixes and repairs in a few seconds (approx. 30 sec. depending on the materials, humidity and temperature levels) many different objects with each other such as wood, ceramics, stone, glass, metals and plastics with each other or in combination.

Not suitable for

Not suitable for PE, PP, PTFE

Working conditions

Application temperature: between +5°C and +25°C.

Preliminary surface treatment

The surface must be dry, clean and free of dust and grease. Roughen surfaces with sandpaper (e.g. metals)

Mixture ratio

4:1

Instructions for use

To assemble the double cartridge remove the black cap from the top of the cartridge and place the white plunger inside the syringe. To open the syringe twist (90°) the gray cap and insert the stirrer. Press the plunger and discard the first drops of glue. Apply a thin layer of glue to one side. Press gently for approx. 30 sec. When you are done fixing remove the stirrer and replace the gray cap to close the syringe so you can use the product again

Advice

When multitasking be careful to use the product so it doesn't mature in the blender about every 5 minutes. If it ripens, use a new mixer. Important: If you run out of stirrers you can do the mixing manually with the help of a wooden stick keeping in mind that the glue may not mix properly.

Stains / residues

Remove wet stains immediately with warm soapy water. Mature adhesive stains can only be removed mechanically.

Storage conditions

Store in a dry and cool place.