METAL TURBO-EPOXY 24ml BLISTER

Applications

For high-quality gluing, plastering, filling and sealing work.
Suitable for: all metals, aluminum, wood, hard synthetic materials, porcelain, stone, clay, terracotta, concrete, marble, ceramics, gemstones, glass, plexiglass, most plastics, etc. Ideal for connecting materials that are different from each other.
NOT RECOMMENDED for polyethylene (PE), polypropylene (PP), Teflon and silicone.

Instructions for use

The surfaces must be dry and clean, free of greasy elements, oils and dust. You can achieve an ideal bond by sanding the surfaces first. Break the tip of the nose and put the required amount. Mix well with a spatula for about 1 minute. Spread the glue on one surface, in a thin layer. On materials with a porous or rough surface, spread the glue on both surfaces and join them immediately. You wipe the nose with some paper and then close the glue with the special cap, which you have broken from the device, following the guide.
Precautions: Material irritates eyes and skin. The use of protective glasses and gloves is recommended. Always follow the instructions
manufacturer's use.

Cleaning

BEFORE: With TURBO TOP-CLEAN or with common cleaners, such as alcohol, turpentine, white spirit, nitrous solvent, etc.
META: The material that will be left over can be cleaned - fresh - with alcohol.