STOCK TURBO-SEAL 600ml WHITE
- Permanently elastic, one-component, base-based sealant, sealant & insulating material SMP – Hybrid Polymer.
- For capillary joints, fissures, cracks and gaps up to 40mm.
- It ripens with moisture.
- It is of neutral polymerization, odorless, without solvents, silicones and isocyanites.
- Environmentally friendly.
Applications:
TURBO - SEAL is suitable for sealing capillary joints, fissures, cracks & gaps up to 40mm, filling local partitions in door and window frames, filling cracks and holes in walls, connecting sealing and insulating material, connecting and sealing local partitions in a substrate floor, easy sealing or connection inside car instruments, balance of vibration elements (ventilation area, car body, etc.), weight saving (due to low density), interior acoustic barrier and at the same time heat and cold insulation.
Instructions for use:
- The surfaces must be clean of dust, grease and old sealants.
- TURBO - SEAL can be applied to many surfaces without a primer. However, where required, the use of a primer is recommended.
- It is applied with a spatula, so even hollow spaces can be easily sealed.
- The correct dimensioning of the joints (joints) is necessary for an excellent sealing.
- The thickness of the material depends on the surface of the materials to be welded.
- You adjust the connection within 5 minutes at the latest.
- The surfaces must remain stable for 24 hours.
- After application, the joints are cleaned and finished with TURBO TOP-FINISH.
Cleaning:
BEFORE: With TURBO TOP-CLEAN or with common cleaners, such as alcohol, turpentine, white spirit, nitrous solvent, etc.
META: The remaining material can be cleaned - fresh - with alcohol or, alternatively, removed with a spatula or knife.
specifications | |
Shore hardness – A (DIN 53505) after 3 weeks of storage at +23°C / 50% humidity | 32 |
Coefficient of elongation 100% and +23°C (DIN 53504 S2) with storage for 7 days at +23°C / 50% humidity |
≤ 1.0 N/mm² |
Elongation at break (DIN 53504 S2) with storage for 7 days at +23°C / 50% humidity |
≥ 100 % |
Tensile strength (DIN 53504 S2) with storage for 7 days at +23°C/ 50% humidity |
≥ 1.0 N/mm² |
Cohesion (DIN EN ISO 7390) | Stable |
Processing time at +23°C / 50% humidity | Max. 5 minutes |
Final cure at +23°C / 50% humidity | After 24 hours ≥ 3.5 mm After 48 hours ≥ 5.5 mm |
Density at +23°C / 50% humidity | 0.38 ± 0.05 g/cm³ |
Volume change after curing (DIN EN ISO 10563) |
≤ 2% |
Resistance to temperatures | -40°C to +90°C |
Application temperature | From +5°C to +40°C |
Substrate temperature | From +5°C to +40°C |
Packing | 750 ml container in a box of 10 pcs and salami of 600 ml |
Approved storage time | 12 months from date production |
Storage conditions | Cool and dry environment |
Additional information
Weight | 0.600 kg |
---|
Reviews