COSMOS PLASTIC PRIMER SPRAY 400ML

Special transparent substrate that solves the problem of plastic surfaces that are difficult to paint.

Ideal for all plastic parts of the car as well as for garden items such as plastic chairs, pots, etc.

• A quick application primer for the perfect pretreatment of plastic surfaces
• Improves adhesion to all plastic surfaces
• High coverage
• Suitable for indoor and outdoor use
• Solvent-based product with special additives that promote adhesion
• Improves the gloss level of the paint
• Creates smooth surfaces
• Drying time varies depending on the temperature and humidity in the area
• It is easily applied
• For professional use only. Contains toluene
• 400 ml

Ideal for all plastic parts of the car as well as for garden items such as plastic chairs, pots, etc.

Shake the container for at least 3 minutes after you hear the ball. Before first use, spray into the air for 3-4 seconds, with the black valve, to remove any concentrated paint from the inner tube. Test the spray first on a test surface. If you press the nozzle while holding your hand steady, there is a chance that the paint will run and create "tears". We recommend that you apply a second coat, with an interval of 10 minutes. For best results paint at temperatures between 10-25°C and when humidity is below 65%. After use, turn the container upside down and spray for 3 seconds. Store 5-35°C.

• Make sure the surface is clean, smooth and dry
• Always use personal protective equipment gloves/mask
• Always paint in a well-ventilated area
• The area should be as dust-free as possible
• Protect the surrounding area to avoid accidents
• Sand carefully and then remove any residue
• Test on a test spray surface first
• Always spray with the can in a vertical position, otherwise the paint may "spray" unevenly.
• Spray the surface from a distance of 25-30 cm
• Spray first vertically and then horizontally
• Apply several thin layers, spraying in quick motions
• Allow each coat to dry for at least 5 minutes
• Can be painted after 3 hours
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)