COSMOS PRIMER SPRAY GRAY 400ML
€5.50 with VAT
Status: 18 in stock
Primer for difficult metallic surfaces. Excellent adhesion to sharp metal surfaces.
High-quality one-component anti-corrosion primer with strong adhesion to difficult surfaces such as aluminum, galvanized substrates, polyesters and non-corrosive metals.
It is specially designed to work with all types of coatings, so as to provide maximum protection against corrosion and other possible damage.
The purpose of the primer is to create a neutral surface on which other coatings can be applied in order to achieve the maximum possible life and the best possible aesthetic finish that you desire.
Cosmos Lac primer sprays are intended to pre-treat and prepare surfaces to offer even greater adhesion and protection prior to painting.
Characteristics:
- A quick application primer for the perfect pretreatment of metal surfaces
- Protects against rust
- Improves adhesion to metal surfaces
- High coverage
- Improves the gloss level of the paint
- Protects against oxidation
- Drying time varies depending on the temperature and humidity in the area
- It is easily applied
- 400 ml
Use:
Ideal for difficult surfaces such as aluminium, galvanized substrates, polyesters and non-corrosive metals. It is specially designed to work with all types of coatings to provide maximum protection against corrosion and other potential damage.
– Flat spray angle
– Adjustable injector
– Uniform spray
– For large surfaces
– For calligraphic effects
TIPS:
Shake the container for at least 3 minutes after you hear the ball. Before first use, spray into the air for 3-4 seconds, with the black valve, to remove any concentrated paint from the inner tube. Test the spray first on a test surface. If you press the nozzle while holding your hand steady, there is a chance that the paint will run and create "tears". We recommend that you apply a second coat, with an interval of 10 minutes. For best results paint at temperatures between 10-25°C and when humidity is below 65%. After use, turn the container upside down and spray for 3 seconds. Store 5-35°C.
- Make sure the surface is clean, smooth and dry
- Always use personal protective equipment gloves/mask
- Always paint in a well-ventilated area
- The area should be as dust-free as possible
- Protect the surrounding area to avoid accidents
- Sand carefully and then remove any residue
- Test on a test spray surface first
- Always spray with the can in a vertical position, otherwise the paint may "spray" unevenly.
- Spray the surface from a distance of 25-30 cm
- Spray first vertically and then horizontally
- Apply several thin layers, spraying in quick motions
- Allow each coat to dry for at least 5 minutes
- Can be painted after 3 hours
- After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)
Additional information
| Weight | 0.500 kg |
|---|
Reviews