SILICONE SPECIAL ANTI-MOLD TRANSPARENT 280ML BISON

• 100% color protection
• ready in 2 hours
• Resistant to (sea) water
• Easy to use
• Permanently elastic
• Mold resistant
• Resistant to UV radiation and weather conditions
• Resistant to chemicals
• Excellent adhesion on all surfaces without primer even on acrylic
• Indelible
• Resistant to temperatures ranging from -50°C to +180°C
• It is not dyed

Ideal for sealing in sanitary ware and ceramic applications such as joints in floor or wall tiles, bathrooms, showers, sinks and kitchen counters. Ideal for acrylic bathtubs, synthetic shower bases and shower walls. Adheres to glass, ceramics, natural and synthetic stone, enamel, metal, wood and various synthetics. Does not stick to asphalt, polyethylene, polypropylene and PTFE surfaces.

Not suitable for polyethylene (PE), polypropylene (PP), PTFE, asphalt and aquariums.

Working conditions

Apply only at temperatures between +5°C and +40°C.

Surface requirements

The surface must be dry, clean and free from dust, rust and grease.

Preliminary surface treatment

For best results, cover the edges of the joint with masking tape. If necessary, avoid three-sided welding by filling the joint with foam support rod or PE film.

Cover

1 cartridge for 8 m of joint (depending on the diameter of the joint).

Instructions for use

Fill the joint evenly within 5-10 minutes and level the surface with a wet spatula or wet finger. Crust formation after about 10 minutes. Ripening 4 mm in 24 hours.

Points of caution

Silicone hardens with the help of moisture. Therefore, contact with atmospheric moisture is necessary for solidification. The application can accept water after 2 hours, but do not touch or use mechanically.

Storage conditions

Store in properly sealed packaging in a dry place between + 5 ° C and + 25 ° C.