SUPER FAST GLUE 20gr

CA (one component) fast setting cyanoacrylate adhesive. Suitable for all combinations of materials.

SPECIFICATIONS:

• Optional open waiting time of 20 minutes
• Correction to welding
• Absolutely transparent
• Flexible, waterproof, resistant to heat and cold
• Changing cap
• Not suitable for teflon, polyethylene (PE), polypropylene (PP)
• It is best kept in a refrigerator or freezer

Instructions for use:

1. The surfaces to be welded must be dry and clean of dust, oils, greasy elements, rust, grease. If the surfaces to be bonded have been glued in the past, the old glue must be scraped off.
2. Glass should be cleaned with alcohol before welding.
3. You will get the best results from the product when soldering at a room temperature of around 18°C.
4. IMPORTANT: The welded parts must be left untouched for a few minutes, without testing whether they are stuck together.
5. The time required for the weld to become fully solid depends on the material of the surface.
6. Depending on the materials, the glue dries/hardens within a few seconds to a few minutes.
7. In any case, after 8 hours any material will have been welded.

Safekeeping:

Clean the detachable cap and then place the tube in an upright position and keep it in a cold place (fridge-freezer).

Cleaning:

BEFORE: With TURBO TOP-CLEAN or with common cleaners, such as alcohol, turpentine, white spirit, nitrous solvent, etc.
META: The material that will be left over can be cleaned - fresh - with alcohol.