THERMOLUX CELL BLUE No:736 0.75 lit TETRALUX
- High quality special water color for cells acrylic 100%.
- Elastomeric acrylic 100% energy thermoceramic paint suitable for painting new unpainted cells as well as for repainting those painted with turpentine varnish.
- Suitable for painting new unpainted cells, but also for repainting old ones painted with turpentine varnish.
- It presents excellent adhesion, elasticity, coverage and an excellent finish.
- It does not turn yellow over time.
- It regulates the humidity of the wood, allowing it to breathe.
- It is completely colony, user and environment friendly.
- It applies to all kinds of wooden painted old hives or new unpainted ones and gives a wonderful glossy surface.
- No special primer is required.
- The surfaces must be clean, dry and free of foreign bodies and substances.
- Shake well before use.
- Unpainted cells Prime from the product itself diluted approximately 50% with water.
- We first apply to the compounds from the product itself without diluting one or two layers.
- The paint is applied in at least two layers for a perfect result.
- Dilutes with water up to 5% for brush, roller or brush application and up to 10% by gun.
- It dries in one hour and can be repainted in 5-6 hours. These times vary according to weather conditions.
- Covers 10-12m2/lt per layer.
- For the best possible energy efficiency we need a film thickness of 300μm and we usually achieve this with three layers.
- Painted cells Prime from the product itself diluted approximately 50% with water.
- The paint is applied in two layers for a perfect result.
- Dilutes with water up to 5% for brush, roller or brush application and up to 10% by gun.
- It dries in one hour and can be repainted in 5-6 hours. These times vary depending on weather conditions.
- Covers 10-12m2/lt per layer.
- For the best possible energy efficiency we need a film thickness of 300μm and we usually achieve this with three layers.
- Shake well before use
- Do not apply at temperatures below 10 oC and above 38 oC
- Close the container after each use
- Certified product for its high reflectivity and low conductivity.
- Protects the cell from extreme cold or high temperature climatic conditions.
- It maintains its elasticity even at temperatures from -20oC to 80oC and perfectly covers capillaries and microcracks.
- It offers excellent waterproofing of cells from moisture
- It is completely colony, user and environment friendly.
- It is applied to all kinds of old and new hives and offers a wonderful matte surface.
- No special primer is required.
- Physical and chemical properties Physical state : Liquid Odor : Characteristic PH value : 8.5 – 9.2
- Physical state change : Boiling point : 100°C Flash point (closed container) : does not burn
- Auto-ignition temperature : not applicable
- Explosion limits : not applicable Vapor pressure (20°C) : 23 mbar (like water) Density (25°C) : 1.04 – 1.06 gr/cm3
- Solubility in water : Soluble Viscosity (25o C) VOC (Volatile Organic Compounds) : : 7,000 – 10,000 mPas
- The maximum VOC content according to Directive 2004/42/EC is 40g/lt (2010). (Category A: “c”, Type: Y, (for exterior walls of mineral substrate)
- The product contains a maximum of 39gr/lt.
Additional information
Weight | 1 kg |
---|
Reviews