SPRAY VARNISH COLORED WOOD N603 WALNUT 400ML

Colored wood varnish. They are ideal for painting and protecting wooden surfaces, they can be used on unpainted wood as well as for refreshing old varnishes. They are remarkably easy to apply to furniture, bamboo, decorative objects, wooden doors, wooden frames, etc.

• Colored wood varnish in walnut shade
• Easy to spray painted varnish for exterior wood surfaces
• Provides superior resistance to moisture and harmful UV rays
• It imparts a durable shine that won't fade over time
• It does not turn yellow over time
• It is easy to wash
• Creates a durable protective film, ideal for wooden floors, frames, doors, decorations and wooden furniture

Shake the container for at least 3 minutes after you hear the ball. Before first use, spray into the air for 3-4 seconds, with the black valve, to remove any concentrated paint from the inner tube. Test the spray first on a test surface. If you press the nozzle while holding your hand steady, there is a chance that the paint will run and create "tears". We recommend that you apply a second coat, with an interval of 10 minutes. For best results paint at temperatures between 10-25°C and when humidity is below 65%. After use, turn the container upside down and spray for 3 seconds. Store 5-35°C.

• Make sure the surface is clean, smooth and dry
• Always use personal protective equipment gloves/mask
• Always paint in a well-ventilated area
• The area should be as dust-free as possible
• Protect the surrounding area to avoid accidents
• Test on a test spray surface first
• Remove any existing varnish, waxes, oils, wood stains, dust, dirt, grease, uneven areas and sticky materials before applying a wood varnish
• Choose a day that won't be too humid. The polish will dry more slowly in wet or cold conditions
• Always spray with the can in a vertical position, otherwise the paint may "spray" unevenly
• Spray the surface from a distance of 25-30 cm
• Apply several thin layers, spraying in quick motions
• Do not re-spray the areas you did not paint with the first coat, but let it dry and then repaint. Don't go back to areas you've already done, as this can cause blurring
  -Do not attempt to remove once applied
• Do not use with non-acrylic media
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)