- One component permanently elastic sealant, waterproofing & insulating material with a base SMP – Hybrid Polymer.
- It ripens with moisture.
- It is of neutral polymerization, odorless, without solvents, silicones and isocyanites.
- Environmentally friendly.
- Suitable for sealing vertical joints up to 40 mm.
Applications:
- Suitable for permanent elastic sealing, sealing, insulation, assembly and bonding in: Construction work, expansion joints of walls, above-ground structures of indoor and outdoor spaces, linings, patios, sanitary ware, decorations, aluminum constructions, iron constructions, hydraulic constructions, etc.
- For permanently elastic seals in industrial applications of iron, steel, metals, aluminium, wood, laminate, skirting, cork, plastics, concrete, stone, plaster, ceramics, mirrors.
- In the automotive industry, electrical installations, wood cladding.
- It is suitable for cases where, after applying the product, painting is required.
Instructions for use:
- The surfaces must be clean of dust, greasy elements and old adhesives.
- TURBO – FIX extra flex can be applied to many surfaces without a primer. However, where required, the use of a solder booster is recommended.
- The correct dimensioning of the joints (joints) is necessary for an excellent sealing.
- To apply the material, cut the tube, screw on the nozzle and spread the material in lines, using a gun or spatula, evenly on the surfaces to be welded.
- The thickness of the material depends on the surface of the materials to be welded.
- You adjust the connection within 30 minutes at the latest.
- The surfaces must remain stable for 24 hours.
- After application, the joints are cleaned and finished with TURBO TOP-FINISH.
- TURBO – FIX extra flex can be painted with water-based paints.
- Due to the variety of varnishes and colors available on the market, a preliminary test is recommended in each case.
Cleaning:
BEFORE: With TURBO TOP-CLEAN or with common cleaners, such as alcohol, turpentine, white spirit, nitrous solvent, etc.
META: The remaining material can be cleaned - fresh - with alcohol or, alternatively, removed with a spatula or knife.
| specifications |
|
| Shore-A hardness (DIN 53505) after 7 days of storage at +23THE c/50% moist |
24 |
| Coefficient of elongation 100% and +23THE c (din 53504 s2) with storage for 7 days at +23THE c/50% moist |
≤ 0.5 N/mm² |
Elongation at break (DIN 53504 S2) with
storage for 7 days at +23°C / 50% humidity |
≥ 500 % |
| Elastic recovery of elongation 60% (DIN EN ISO 7389) |
>70% |
Tensile strength (DIN 53504 S2) with storage
for 7 days at +23°C / 50% humidity |
≥ 0.7 N/mm² |
| Mobility ability |
25% |
| Cohesion (DIN EN ISO 7390) |
≤ 3 mm |
| Processing time at +23°C / 50% humidity |
max. 30 minutes |
| Final cure at +23°C / 50% humidity |
After 24 hours ≥ 2.0 mm
After 48 hours ≥ 3.0 mm |
| Density |
1.53 ± 0.05 g/cm3 |
Volume change after curing
(DIN EN ISO 10563) |
≤ 3% |
| Resistance to temperatures |
From -40 °C to +90 °C |
| Application temperature |
From +5°C to +40°C |
| Substrate temperature: |
From +5°C to +40°C |
| Colors |
White, gray |
| Packing |
Cartridge 290 ml or salami 600 ml |
| Approved storage time |
18 months from date
production |
| Storage conditions |
Cool and dry environment |
Reviews