PU MAX WOOD GLUE 250GR BOTTLE D4 BISON
- Transparent / white
- Fiber reinforced
- Working time: 1 hour
- Liquid
- Resistant to (sea) water (D4)
- Limited swelling
- Resistant to weather conditions
- No solvents
- Can be painted
- It can be rubbed
For waterproof (D4) (flat) welding of almost all types of wood. It is used in non-load-bearing wooden structures, in various forms of wood joints, such as ring joints, joints, mortise and tongue joints, pins and springs. Suitable for indoor and outdoor applications such as shipbuilding, facade carpentry and sandwich panels. It is also suitable for less easy connections (eg slatted wood). It is only applicable if one of the two surfaces is porous (high absorbency).
Not suitable for
Not suitable for joining polyethylene (PE), polypropylene (PP), PTFE and nylon (PA).
Working conditions
The temperature of the environment, the glue and the materials to be glued must not be lower than +5°C. Relative humidity up to 65%. Wood moisture level between 10% and 18% (max 25%).
Surface requirements
The surfaces to be glued must be clean, dry and free of dust. Moisten the unglued side with a damp cloth.
Preliminary surface treatment
The surfaces must be clean, free of dust and grease and fit well with each other. For optimal strength of the connection, the gap should not be more than 0.1 mm. Degrease oily types of wood with solvent.
Tools
Notched spatula (1 mm) or brush and glue clamp or press.
Cover
5-6 m²/kg
Instructions for use
Apply a thin and even layer of adhesive to one of the two surfaces using a notched trowel (1 mm) or brush. Join the two surfaces within 30 minutes and apply pressure or apply clamps for at least 4 hours.
Stains / residues
Immediately remove glue stains with or acetone. Dry stains can only be removed mechanically.
Storage conditions
Store in a properly sealed package in a dry place, at a temperature of +10°C to +20°C.
Additional information
Weight | 0.285 kg |
---|