TOILET RENOVATION COLOR V33 1lt WHITE SEMI GLOSS

• The water colors RENOVATION PERFECTION® for Sanitary Ware and the special protective varnish, have been specially designed for the renovation of surfaces with continuous use and heavy stress.
• Thanks to the special emulsions and activators (ADDITIVE system) they contain, they achieve a perfect, SATIN finish and durability in daily use.
• Based on HYDRO+ technology, the RENOVATION PERFECTION® coloring system for Sanitary Ware, creates a waterproof surface with resistance to continuous contact with water and temperature changes.
• PERFORMANCE: 1L is enough for 3 m² in 2 layers

The container includes the paint and the bag with the hardener of the color, as well as the varnish with the corresponding bag of the hardener, which you will find under the lid of the package.

• Remove silicones and other sealants before painting.
• Reapply after painting.
• The surface before painting must be clean, dry and free of grease.
• Clean the surface carefully with an alkaline household cleaner (eg baking soda or green soap).
• Rinse thoroughly with water and allow to dry thoroughly.

• Pour all the hardener (it's the bag you'll find under the lid of the container) into the paint.
• Mix with the stirring spatula for at least 5 minutes, ensuring that all the ingredients from the bottom of the container and the hardener are well mixed.
• Disassemble faucets or apply masking tape to all surfaces you need to protect from getting dirty.
• Pay attention to hard-to-reach places and around metal accessories.
• Apply the 1st coat of color with the foam roller, starting from the center or bottom and work your way up or out.
• Paint small areas at a time – about 15cm long.
• Remove the paper tapes and let dry for 8h.
• Do not start the 2nd coat before the 1st coat is completely dry.
• The color does not cover in one coat – 2 coats of color are required to complete the effect.
• Apply paper tapes again and the 2nd coat of paint in the same way.
• Let it dry for another 8 hours before applying the varnish.

• Pour all the hardener (it's the bag you'll find under the lid of the container) into the varnish.
• Mix with the stirring spatula for at least 5 minutes, ensuring that all the ingredients from the bottom of the container and the hardener are well mixed.
• Paint small areas at a time – edge to edge.
• Continue crosswise (up/down then right/left).
• Let it dry for 8 hours and then apply the 2nd layer in the same way.
• It is necessary to wait 7 days for the varnish to dry completely before using or cleaning the painted sanitary ware.
• After opening the container and adding the hardener, the paint must be used within 10 days in order not to reduce its strength and adhesion.

The maximum performance and adhesion of the paint is achieved 20 days after application. Do not stress painted surfaces by knocking, rubbing and vigorous cleaning for the first 20 days after application.